Skip to content
Emlid Reach RS3 GNSS Receiver

Emlid Reach RS3 GNSS Receiver

by Emlid
$2,999.00 - $2,999.00
$2,999.00
$2,999.00 - $2,999.00
$2,999.00
Overview

Reach RS3 gets a centimeter-accurate solution in about 5 seconds. It maintains robust performance even when the sky view is partially obstructed, or the receiver itself is tilted.

GPS/QZSS, GLONASS, BeiDou, and Galileo

L1C/A, L2C, L1OF, L2OF,B1I, B2I, E1B/C, E5b

RINEX logging and PPP support

Up to 22 hours on 1 charge

Built-in LTE modem

Get corrections from CORS, Reach,
or 3rd-party base

NTRIP

Base and Rover

Work in RTK with VRS or a single baseline CORS network. You
can also connect another GNSS receiver as an NTRIP base using Emlid NTRIP Caster. 

Compatibility

Any receiver with RTCM3 support

Dual Band Radio

LoRa 868/915 MHz
Base and Rover

Perfect for areas with no internet coverage for NTRIP. LoRa is used when connecting Emlid receivers over the radio.

UHF 450 MHz
Rover

An option to mix and match RTK receivers within your fleet. You can configure your Reach RS3 to receive corrections from an existing base*.
You can also use a high-power external radio on your Reach base and connect with the UHF radio receiver in Reach RS3.

CompatibilityBases with radios that
transmit TRIMTALK 450S**

*Requires a 410-470 MHz
antenna, sold separately

**TRIMTALK is a trademark
of Trimble Inc.

SPECS
RS3 SPECS in PDF